Technogym Vario Excite + 500, Service Maintenance Manual

Page: 101 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.1
7. DISASSEMBLY OF COMPONENTS
7.1. DISASSEMBLING THE DISPLAY
7.1.1. 500
AND
500SP
VERSION
Figure 7.1-1
Turn off the machine and unplug the mains lead
from the wall outlet:
1.
Back off the 4 screws (a) using a medium
Phillips screwdriver.
Figure 7.1-2
2. Unplug the connector highlighted in the
figure at the side.
3.
Remove the Display.
Figure 7.1-3
4. Back off the 2 screws (b) , using an 8mm
hexagonal wrench, for remove the rear
support of the Display.
To reassemble the LED Display,
carry out the above steps in reverse order.