Technogym SYNCHRO Excite +, Service And Maintenance Manual

Page: 179 / 196

SYNCHRO : Service & maintenance manual - rev. 7.1
Page 9.23
9.4. CONFIG.: VISIO - VISIOWEB USER MENÙ
The procedure is activated by pressing the top right-hand corner, the bottom left-hand corner and the
bottom right-hand corner of the screen in that sequence, in Stand-By, as shown in the figure below:
A new display will appear from which you can gain access to the various configuration menus, by
entering the password on the number keyboard:
Enter the password
2406
and press the ENTER key to confirm or EXIT to quit.
A menu will then appear which will provide access to the following sub-menus:
For the following menu, please refer to the relevant chapter in the VISIO manual.