Technogym New Bike EXCITE Plus, Technical Service Manual, Page: 219 / 237

- New Bike: Technical service guide - rev. 4.1
Page 9.25
9.5.1.1. Table of configuration parameters
To display the parameter values correctly, it is necessary to read them from the Low Kit,
using the function “Read from low kit”.
After making any changes to the parameters, it is necessary to write them (save them) on
the Low Kit, using the function “Write to low kit”.
Id
(Par.)
Unit
of measure
Name Description
VISIO
Pow.
1 decimals [Rt] Transmission report 135
2 [Rvel] Speed Ratio (whole part) 9
3 mA [Im] Minimum Braking 500
4
W [Pmc] Constant maximum power
200
5
in
hundredths.
[Km] Power corrective coefficient 100
6 0.1N [Ca] User friction torque 13
7
°C [Tea] Maximum temperature on the coil
125
8
rpm user [RPMmin] Minimum Rpm (start cut braking ramp)
30
9 type/sec [RpmF1] Rpm integration scale
1
10 rpm user [RpmF2] Rpm filter threshold 30
11
[Rvel] Speed Ratio (decimal part) 0
12 0.1N [D_Ca] Delta User friction torque 8
13 - -
Enable flag for registers at address ≥ 100
-