Technogym New Bike EXCITE Plus, Technical Service Manual

Page: 216 / 237

- New Bike: Technical service guide - rev. 4.1
Page 9.22
9.3.7.2. Low Kit fault code
This function allows you to display any fault code which is blocking the low kit. In order to access
this menu, when the display shows:
LOW KIT FAULT CODE
if you press
ENTER , the following message will be displayed:
FAULT=XX
If FAULT=00 is displayed, the Board is not at fault.
9.3.8. H
IGH KIT VERSION
This function allows you to display the version of the display SW. In order to display it, when the
display shows:
HIGH KIT VERSION
press
ENTER and a message will be displayed which identifies the version of the SW.
9.3.9. BOOT
VERSION
This function allows you to display the BOOT version. In order to display it, when the display
shows:
BOOT VERSION
press ENTER and a message will be displayed which identifies the BOOT version.
The Boot Version parameter refers to the “boot” version relating to the display
hardware. The boot is a part of the software which allows you to load the TG
application onto the display board. The parameter is used solely as info. It is NOT
possible to change the version or update it.
9.3.10. K
EY
R
EADER
V
ERSION
This function allows you to display the Key Reader Version .
In order to display it, when the display shows:
KEY READER VERSION
press ENTER and a message will be displayed which identifies the version of the KEY READER.