Technogym New Bike EXCITE Plus, Technical Service Manual

Page: 213 / 237

- New Bike: Technical service guide - rev. 4.1
Page 9.19
9.3.5. E
RRORS
L
OG
This function allows you to access the log of errors generated by the equipment. In order to access
this menu, when the display shows:
ERRORS LOG
press ENTER . This function is structured in the following way:
ERRORS LOG
Error 10
Error 1
RESET ERRORS ?
READ FROM
LOW KIT ?
.......................
COM.Fault
Inside this function, in addition to the errors recorded by the equipment, we also find 3 sub-
functions, as described below:
9.3.5.1. Read from low kit
To recall the errors memorized by the low kit and to be able to visualize them on the display, move
using the +/- keys of the difficulty level until the display shows:
READ FROM LOW KIT ?
press ENTER to load the parameters found in the low kit. Return to the upper level by pressing
CANCEL for a few seconds.
9.3.5.2. Reset errors
To reset the errors log on the high kit and on the low kit, move using the +/- keys of the difficulty
level until the display shows:
RESET ERRORS ?
press ENTER to reset the errors log. Return to the upper level by pressing CANCEL for a few
seconds.