Technogym Jog Now Excite+ 500, Service Maintenance Manual

Page: 68 / 202

JOG NOW : Service & maintenance manual - rev. 5.1
Page 6.2
6.1. TROUBLESHOOTING MENU SERVICE: LED MODELS
This section can be used to test the operation of some machine components (AC/DC Motors, LED
display, keyboard, serial ports, and inverter). It is invoked, when the machine is in standby mode, by
simultaneously pressing the keys ENTER , ↑ , CLEAR . The following prompt appears on the LED
display:
ENTER LA PASSWORD:
To access the procedure, insert the password
2501
which protects against unauthorized access and
press ENTER to confirm. To enter the password without the numeric keypad, enter one digit at a
time using the ↑ and ↓ keys to change the value and the +/- GOAL keys to scroll to the next
character. At this point there are two options available:
↑ = Tech Config
↓ = Troubleshooting
Press
↓
to access the troubleshooting menu, which is structured as shown in the figure below.
TROUBLESHOOTING
MANUAL TEST
MAN.INVERTER
TEST
MAN.UPDOWN
TEST
MAN.KEYBOARD
TEST
I2C Devices Test
AUTOMATIC TEST
UpDown Test
Inverter Test
LED Test
SERIAL PORTS
TEST
CSafe COM Test
TGS COM Test
Low Kit COM Test
To scroll through the list of available functions, press the + or – speed keys to display the
next or the preceding item; confirm the choice by pressing ENTER. To cancel the
operation, press the CLEAR key for a few seconds.