16
Lower Back
A
C
B
Adjusting the weight stack cable tension
Use the adjuster (
C
) to adjust the tension of the weight stack cable.
- Remove the rear protective weight stack panel.
- Loosen the locknut (
B
).
- Tighten or loosen the adjuster (
C
) to correctly adjust the cable tension.
- Tighten the locknut (
B
).
- Refit the protective panel on the weight stack.
Warning
To pull the cable taut after replacement, it may be helpful, when tightening
the screws (A), to insert a thickness of approx. 10 mm (1/2”) under the first
weight in the weight stack.
