Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 422 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.248
7.6.33. D
ISASSEMBLING THE BARS
Figure 7.6.33-1
Follow the steps described in paragraphs 7.6.23.
“Disassembling the rear lever guard”, 7.6.26.
“Disassembling the levers”, 7.6.27.
“Disassembling the front lever guard”, 7.6.28.
“Disassembling the weight stack cover” and
7.6.29. “Disassembling the column extension”.
For each of the 2 counter-weight vibration bars:
1. Unscrew the 2 dowels
a , using a 4-gauge
hexagonal T-wrench.
Hold the BAR up before unscrewing the
last screw .
2. Rest the BAR on the floor.
3. Remove the rubber holding the BAR in
place.
4. Remove the BAR by sliding it upward.
To remove the bar, it may be necessary
to bend the encoder support slat.
To reassemble the BARS, follow the above steps
in reverse order