Techno Line WQ 296, Manual

Page: 14 / 63

EN6
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which
maybe caused by electro-static discharge or other interference, open the
battery cover, take out the batteries a few seconds and reinstall them by
observing the correct +/- polarity. Your unit will be reset to default
settings and you need to set it again.
CARE OF YOUR PRODUCT
1. Place your unit on a stable surface, away from sources of direct
sunlight or excessive heat or moisture.
2. Protect your furniture when placing your units on a natural wood and
lacquered finish by using a cloth or protective material between it and
the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and
water. Stronger agents such as Benzine, thinner or similar materials can
damage the surface of the unit. Make sure the unit is unplugged before
cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries.
5. If the unit is not to be used for a prolonged period, such as a month or
longer, remove the batteries to prevent possible corrosion. Should the
battery compartment become corroded or dirty, clean the compartment
thoroughly and replace the batteries.
PRECAUTIONS

This main unit is intended to be used only indoors.

Do not subject the unit to excessive force or shock.

Do not expose the unit to extreme temperatures, direct sunlight, dust
or humidity.

Do not immerse in water.

Avoid contact with any corrosive materials.

Do not dispose this unit in a fire as it may explode.

Do not open the inner back case or tamper with any components of
this unit.
BATTERY SAFETY WARNINGS

Use only alkaline batteries, not rechargeable batteries.

Install batteries correctly by matching the polarities (+/-).