HSC-1
Intelligent Battery Charger
Important Note
Please ensure that you have read all the
Information contained within this
manual before proceeding with installation.
Retain this manual for future reference.
If needed the unit can be cleaned with a dampened cloth. DO NOT use solvents or cleaning
liquids, as this will damage the finish of the unit.
Cleaning the unit
Trouble shooting Guide
Zinc carbon battery used.
Battery is faulty.
Incorrect battery selector
switch position.
Microcontroller error.
No Power
Check and replace.
Discard battery.
Check and reset switch.
Remove DC plug wait for
10 seconds and re insert the
DC plug.
Check supply to AC
adaptor and DC plug
connetion to changer.
Display Shows "Bad"
LED indicators do not
illuminate
Problem
Possible Cause
Solution
MU-
HSC1-STD
