Techno CNC Systems WinCNC, User Manual

Page: 22 / 38

22 Call: 1-631-648-7481 or Visit: support.technocnc.com
Plasma User Manual
WinCNC
Step 5 - Setting Z=0
Place the Pen in the pen holder. Carefully lower
the Pen down using the Z down button. Once the
tip is touching the material, press “Set Z”.
Step 7 - Start the File
Press play.
The machine will proceed to execute
the G-code program.
Step 6 - Load and Simulate G-Code file
Press “Open” and navigate and select the file you
would like to run. Once selected, choose “Simulate”
to check for errors. You may also choose “View” to
show the tool paths in the Viewer window.
OPEN
SIMULATE
VIEW
PLAY