20
Connection auxiliary relay HIREL-230V
Example: Connection HIREL16x2 for analogue outputs A7 and A8.
Program outputs A7 and A8 as switching outputs.
The auxiliary relay cannot be integrated in the module; it requires its own enclosure.
HIREL-230V wiring diagram
Both relay outputs are protected by the fuse on the relay module. Terminal "
W
" therefore corresponds
to phase conductor "
L
".
If the fuse is removed, both outputs will be potential-free whilst remaining connected to one another
via root "
W
".
The relay module can be connected to any two outputs between
A7
and
A10
if these have been pro
-
grammed as switching outputs.
