Technische Alternative CAN-EZ3, General Information, Installation And Connection, Relevant Functions

Page: 69 / 96

69
Designation
Every CAN analogue output can be given its own designation. The designation can be selected from
various designation groups or can be user defined, as for the inputs.
Example:
Transmission condition
Example:
If change > 1.0 K If the current value has changed by more than 1.0 K compared to the last
transmitted value, a new transmission is made. The unit used by the
source is applied to the output value (minimum setting: 0.1 K).
Blocking time 10 s If the value changes by more than 1.0 K within 10 seconds of the last
transmission, the value is nevertheless only transmitted again after 10
seconds (minimum setting: 1 sec.).
Interval time 5 m The value is transmitted every 5 minutes even if it has not changed by
more than 1.0 K since the last transmission (minimum setting: 1 minute).