TechniSat TECHNIMAX SR1, Quick Start Manual

Page: 7 / 176

7
EN
FR
IT
NL
PL
3 Safety instructions
Please fully charge the robot vacuum cleaner's battery before using it for the first time. Use only the supplied
base station and the supplied AC adapter for charging. Using other components to charge the robot vacuum
cleaner may damage the device and will void the warranty.
To maintain the capacity of the rechargeable battery for as long as possible, the device should only be stored
and operated at room temperature. At least once a year, the battery must be fully charged in order to avoid a
deep discharge.
The operating temperature of the robot vacuum cleaner is between 10°C and 40°C. Operation and storage
should never take place outside this temperature range, otherwise the service life can be reduced.
If the power adapter, power cord or base station is damaged, stop using these parts and contact your dealer
to replace the defective parts.
Before cleaning, the floor must be cleared of objects that the robot could suck in or damage. Cables may
be damaged by the rotating brush, and fine textiles may wrap around the rotating brush causing significant
damage. Before each use, please ensure that the robot vacuum cleaner can move around freely.
The robot vacuum cleaner has crash sensors that prevent the device from falling from a height. Please
make sure that these sensors, which are located at the bottom of the robot, are cleaned at regular intervals.
Moreover, ensure that these crash sensors are in no way covered up. We recommend cleaning after every use.
The robot vacuum cleaner cannot be used for cleaning stairs, tables and shelves. The robot is unable to drive
over and clean deep-pile carpets.
The robot vacuum cleaner has rotating parts which must never be touched during operation due to the risk of
injury!