TechniSat SKYRIDER DOME, Instruction Manual

Page: 35 / 112

35
DE
EN
FR
IT
NL
PL
5.3 DiSEqC setting
By default, DiSEqC is turned off. If you want to use DiSEqC, your connected receiver must support at least DiSEqC 1.0 and its
satellite configuration must be set according to the table below.
No. Position / Option Satellite
1 A / A Astra 28,5° East
2 A / B Astra 19,2° East
3 B / A Hotbird 13,0° East
4 B / B Eutelsat 5,0° West
> To enable or disable the DiSEqC function in the controller, press the DiSEqC button on the controller for 2 seconds.
The current status is indicated by the DiSEqC LED on the controller.