14
DISCOVERY
________________________________________________________________________
Touch the “CONFIGURATION MENU”
in the VOLUME window.
TV MODE
___________________________
CATV (CABLE) MODE
_________
Identifies the modulation of a tuned TV channel in the TV master PLAN
Touch “TV” and then “DISCOVERY”
and set the identification mode:
- ONLY DVBT (only digital DVB-T/T2 signals);
- DVBT&C +AnTV (digital DVB-T/T2/C & TV
analogic signals);
- DVBT + AnTV (Digital DVB-T/T2 & TV
analogic signals).
Touch “CATV” and then “DISCOVERY”
and set the identification mode:
- CABLE ONLY
- TERR & CABLE
NOTES:
- DISCOVERY mode is active only if the antenna cable is connected to the instrument
- DISCOVERY mode is not active if you use a manual (ManuMemory Mix) or automatic
memory plan (Automemory TV)