12
BP60-SD UG 202109-01
Introduction
TECHNICAL SPECIFICATIONS
Product Name
Bracket Pro Serie® 60-SD
Product Description
Single disc bracket mounting system to secure the Hamilton-T1
ventilator on surfaces and cots/stretchers in emergency vehicles
Compatibility of Medical Device*
Hamilton-T1 Ventilator from Hamilton Medical
Environment of Usage
EMS/CCT (Ground & Flight) – Hospital/Clinic, Military
Product Section Material
•
Main Assembly: Aluminum 6061-T6
•
Standard Bottom Disc: Aluminum 6061-T6 with 304 Stainless
Steel Insert
Product Finish
•
Main Assembly: Silver-Anodized Finish
•
Standard Bottom Disc: Silver-Anodized Finish
Environmental Regulations
Complying with RoHS 3
Temperature of Usage
- 35° C to 45° C
Certification
Tested in Compliance with:
•
SAE J3043 (26 G)
Installation
Device Retained on Main Assembly with 2 upper arms with
Red Quick Release Mechanisms and lateral blockers
Attachment Options
Standard Bottom Disc
Transportation Compatibility System
Compatible with Technimount’s:
•
Standard Surface Base
•
Safety Arm System For Stryker Cots (PowerPro – XT and Mx-Pro)
•
Floor Mount (Flight)
Features
•
Robust Mounting Solution for EMS/CCT/ALS Transport
•
No Screw or Attatchment into the Housing of the Medical Device
•
Access to all Connectors and Accessories
•
Flight and Ground Compatibility
•
Multiple Configuration Options for Transport
Physical Overall Dimensions
Width 11.5 in, Depth 10.2 in, Height 11.5 in
Weight
5.8 lb
Part Number
• 700-12-HMSD - Bracket Pro Serie® 60-SD
• 100-20-UN - Standard Surface Base
Others Models and Configuration Options
Contact Technimount EMS for more information or for other options at
* Product and medical equipment manufacturers names are trademarks™ or registered trademarks® of their respective
holders. Technimount does not have a commercial relationship with these medical equipment manufacturers.
