Technimount System BRACKET PRO 76 Series User Manual Download

Page: 12 / 42

Return To Table of Contents

BP76 UG 202110-01

www.technimount.com

Introduction

SPECIFICATIONS

Product Name

Bracket Pro Serie

Product Description

Dual disc bracket mounting system to secure the Temps® Pro on surfaces,

cots/stretchers, floor and walls in emergency vehicles

Compatibility of Medical Device*

Tempus® Pro Monitor from Philip

Environment of Usage

EMS (Ground & Flight), Hospital/Clinic, Military

Product Section Material

•

Main Assembly: Aluminum 6061-T6

•

Universal Bottom Disc: Aluminum 6061-T6 with Stainless Steel Insert

and Peek Cushions

Product Finish

•

Main Assembly: Black and Red-Anodized Finish

•

Universal Bottom Disc: Silver-Anodized Finish

Environmental Regulations

Complying with RoHs 3

Temperature of Usage

- 35° C to 45° C

Certification

Tested in Compliance with:

•

SAE J3043 (26 G)

Designed to Comply with:

•

FAA, 14 CFR

23 (applicable sections)

Installation

Device Retained on Main Assembly with Locking and Red Quick Release

Mechanism

Attachment Options

2 Locking Discs – Standard Bottom Disc – Anti-Rotation Micro Disc

Transportation Compatibility System

Compatible with Technimount's:

• Standard Surface Base

•

Safety Arm System for Stryker Cots (PowerPro – XT and Mx-Pro)

•

Floor Mount Platform (Flight)

• Wall Mount System

• Safety MD Transporter

Features

•

Access to Printer and Connectors and Accessories

•

No Screws Attached to the Medical Device

• Red Quick Release to Easily Insert and Remove the Medical Device

Physical Overall Dimensions

Bracket Pro Serie

• Width 13.08 in, Depth 8.06 in, Height 12.27 in

Bracket Pro Serie

76-SMT

• Width 13.08 in, Depth 8.06 in, Height 13.82 in

Weight

• 5.87 lb - Bracket Pro Serie® 76

• 6.63 lb - Bracket Pro Serie

76 - SMT

Part Numbers

• 320-10-PRO-RDT - Bracket Pro Serie

• 320-10-PRO-RDT-SMT - Bracket Pro Serie

76 - SMT

• 100-20-UN - Standard Surface Base

Other Models and Configuration Options

Contact Technimount EMS Customer Service for more information or for

other options at

[email protected]

*Product and medical equipment manufacturer names are trademarks™ or registered trademarks® of their respective holders. Technimount

does not have a commercial relationship with these medical equipment manufacturers.

Summary of Contents for BRACKET PRO 76 Series











































Search results

Summary of Contents for BRACKET PRO 76 Series

Reviews:

Related manuals for BRACKET PRO 76 Series

Brands by name

Popular brands

Technimount System BRACKET PRO 76 Series, User Manual

Search results

Summary of Contents for BRACKET PRO 76 Series

Reviews:

Related manuals for BRACKET PRO 76 Series

Brands by name

Popular brands