Technimount System BRACKET PRO 75 Series User Manual Download | Manualshive

Page: 16 / 40

background image

Return To Table of Contents

16

BP75 UG 202110-01

www.technimount.com

Installation Guide

REMOVING THE PACKAGING FOR INSTALLATION

1.

Unpack boxes and check all items.

2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to

installation.

3.

Identify all of the product components and hardware prior to starting the installation.

4. The Bracket System must work properly before being put into service.
5.

Refer to the identification of components at the beginning of this user guide if needed.

TOOLS REQUIRED FOR INSTALLATION

Below are the basic tools required for installation. If you have any questions regarding the installation, or need

assistance, please contact our Technical Support team at

[email protected]

9

Philips Screwdriver

NOTE

9

Electrical tools are not recommended, as there is a potential risk of damage to the threads.

9

Technimount System provides screws with Nylon Patch for the installation of the locking assembly block.

«
...
14
15
16
17
18
...
»

Summary of Contents for BRACKET PRO 75 Series









































Reviews:

No comments

Related manuals for BRACKET PRO 75 Series

TH32LRU20 - HOSPITALITY LCD HDTV

Brand: Panasonic Pages: 16

Brand: Magnavox Pages: 40

Brand: Magnavox Pages: 8

Brand: Magnavox Pages: 2

Brand: Magnavox Pages: 25

13MT143S, 20MT133S, 20MS233S

Brand: Magnavox Pages: 37

Brand: Hisense Pages: 50

Brand: TCL Pages: 19

Brand: AVteq Pages: 3

Brand: Zenith Pages: 44

Brand: Salora Pages: 128

XEPHIA 42 PW 110-6606 TOP

Brand: Grundig Pages: 36

Brand: GPX Pages: 16

SaorView WP1640DVD

Brand: Walker Pages: 44

Brand: Goobay Pages: 76

Brand: Premier Pages: 105

Brand: E-MORE Pages: 44

Brand: Garelick Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands