Technimount System BRACKET PRO 100 Series User Manual Download Page 12

Page: 12 / 38

Return To Table of Contents

BP100 UG 202002-R01

www.technimount.com

Introduction

SPECIFICATIONS

Product Name

Bracket Pro Serie

100

Compatibility of Medical Device

Crossvent Ventilator from Bio-Med Devices

Environment of Usage

EMS (Ground & Flight) – Hospital/Clinic, Military

Device Section Material

High-Density Aluminum with Gray Anodized Finish – Acetal Feet

Bottom Disc Section Material

Aluminum with Stainless Steel Insert and Peek Cushions

Anti-Rotation Back Disc Material

High-Density Aluminum with Gray-Anodized Finish

Temperature of Usage

- 35° C @ 45° C (Direct Conduction)

Impact Resistance – Ground - USA

SAE J3043 (30 G) Plus 10% Safety Factor in process

Medical Device Retaining System

Device Retained on Main Assembly with Back Plate

Retaining System

2 Locking Discs – Standard Bottom Section – Back Anti-Rotation Micro Disc

Transportation Compatibility System

•

Compatible with Technimount’s Standard Surface Base

•

Compatible with Technimount’s Stretcher Safety Arm System For

Stryker Cots (PowerPro – XT and Mx-Pro)

•

Compatible with the Floor Mount Platform (Flight)

•

Compatible with Wall Mount System (Micro Base System)

•

Compatible with the Safety MD Transporter

Features

•

Robust Mounting Solution for EMS/CCT/ALS Transport

• Access to all Connectors and Accessories

Physical Overall Dimensions

Length 12.5 in., Width 7.33 in., Height 8.67 in.

Weight (Bracket Only)

Bracket Only – 3.78 lbs

Crossvent 4+ Device 10.5 lbs or 13.5 lbs (with optional blender)

Crossvent 2i+ Device 7.65 lbs

Part Number

Bracket only - 1200-10-CV

Summary of Contents for BRACKET PRO 100 Series







































Search results

Summary of Contents for BRACKET PRO 100 Series

Reviews:

Related manuals for BRACKET PRO 100 Series

Brands by name

Popular brands

Technimount System BRACKET PRO 100 Series, User Manual

Search results

Summary of Contents for BRACKET PRO 100 Series

Reviews:

Related manuals for BRACKET PRO 100 Series

Brands by name

Popular brands