28
Maintenance
CLEANING THE DISC
A defective or dirty disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface of the disc.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzene or alcohol to clean the disc.
• Do NOT use irregular shape discs (example : heart shaped, octagonal, etc.). They may cause
malfunctions.
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth
which has been dipped in a weak soap-and-water solution and wrung out thoroughly. Then
wipe it with a dry cloth.
• Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use
compressed air to remove dust.
IMPORTANT NOTE
Before shipping the unit, remove any disc from the disc compartment.
Password
Use or button to shift and select PASSWORD, use button to “Change”, then press the
ENTER/
OK
button. Enter your 4-digit security code until to OK. Press the
ENTER/OK
button.
Parental Control
DVDs are rated according to their content and some are equipped with a password function. The
contents allowed by parental lock level and the way a DVD is controlled may vary from disc to
disc. For example, if the disc allows, you could lockout violent scenes unsuitable for children or
you could lock out playback of the disc altogether.
You cannot play password function equipped DVDs rated higher than the level you selected
unless you cancel the parental lock function.
The parental lock levels are equivalent to the following ratings.
Level 1 : Kid Safe
Level 5 : PG-R
Level 2 : G
Level 6 : R
Level 3 : PG
Level 7 : NC-17
Level 4 : PG-13
Level 8 : Adult
If you forget the password, you can erase your current password by pressing number button
8 on the remote four times, then press the ENTER button to confirm the setting
(PASSWORD : 8 8 8 8).
Default
It takes 3-5 seconds to reset the unit to the factory default.
cuStoMiZinG tHe function SettinGS
Summary of Contents for DVDID-501
Page 1: ...DVDID 501 15 4 LCD TV DVD ...
