88
(Continued)
General
The unit does not work.
Operations are not done properly.
•
One of the unit’s safety devices, etc. may have
been activated.
Press [
] on the unit to switch the unit to
standby.
•
If the unit does not switch to standby, press
[
] on the unit for at least 5 seconds. The
unit is forcibly switched to standby.
Alternatively, disconnect the AC mains lead,
wait for at least 3 minutes, then reconnect it.
Press [
] on the unit to switch on. (It may take
some time for this unit to be turned on.)
•
If the unit still cannot be operated, consult the
dealer.
•
The remote control may not work properly. (
⇒
A “humming” sound can be heard during
playback.
•
An AC mains lead of another device or fluorescent
light is near the cables. Turn off other appliances,
or keep them away from the cables of this unit.
•
A strong magnetic field near a TV or other device
may adversely affect the audio quality. Keep this
unit away from such a location.
•
The speakers may output noise when a device
nearby is emitting powerful radio waves, such as
when a mobile phone is on a call.
No sound.
•
Check the volume of the connected device. Check
the volume of this unit if “A.Output Level” is set to
“Variable”.
•
Check to see if the cable connections to the input
and output terminals are incorrect. If this is the
case, turn this unit to standby and reconnect the
cables correctly.
•
Check to see if the correct input source is selected.
•
Insert the plugs of the cables to be connected all
the way in.
•
Playback of multi-channel content is not
supported.
•
The digital audio input terminal of this unit can
only detect linear PCM signals. For details, refer to
the operating instructions of the device.
•
Audio signal of Super Audio CD and Super Audio
CD layer of Hybrid Super Audio CD cannot be
output from the digital audio output terminal
of this unit. Connect the device to the analogue
audio output terminal.
•
Check if “Digital Output” or “Analog Output” is set
to “On”. (
⇒
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
