45
Using USB device
(Continued)
You can connect a USB device to the unit
and play back music stored on the USB
device.
•
Refer to “USB” (
⇒
99) for information
about the USB device this unit can play
back.
USB device
1 Connect a USB device to the USB-A
terminal (USB Front) on the front of this
unit.
2 Press [NWP].
3 Press [>INPUT<] repeatedly to select
“USB Front”.
•
You can also select the input source by turning
the multi control knob after pressing [INPUT] on
the unit.
•
The folder/content selection screen will be
displayed.
4 Press [ ], [ ] to select an item and then
press [OK].
•
Repeat this step to make further selections.
•
Press [RETURN] to return to the previous folder.
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
