44
Pure Disc Playback
By disabling the network functions, etc. this unit
operates exclusively for the playback of CD/SACD
for the higher quality sound.
1 Press [CD] for 5 seconds or longer.
•
A confirmation screen appears.
2 Press [OK].
3 Press [ ], [ ] to select “Yes” and then
press [OK].
•
Playback of the online music streaming services,
music files from network devices, etc. cannot be
available while “Pure Disc Playback” is enabled.
•
You can also set “Pure Disc Playback” to “On”
from the setup menu.
Press [NWP].
Press [SETUP].
Press [ ], [ ] repeatedly to select “Pure Disc
Playback” and then press [OK].
Press [ ], [ ] to select “On” and then press
[OK].
Note
•
Operating from “Technics Audio Center” app, etc.
are not available after setting.
•
The programme playback cannot be set.
•
Press again for 5 seconds or longer to cancel and
return to the normal mode.
•
The display is turned off by dimmer function
after setting “Pure Disc Playback” to “On”. Press
[DIMMER] repeatedly to switch the brightness.
(
⇒
•
Track number of playback is only displayed while
this unit is in “Pure Disc Playback” mode.
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
