35
(Continued)
This unit’s name on the network
“Friendly Name”
You can change this unit’s name on the network
(e.g. “Room 1” or “Living Room” etc.).
1 Press [NWP].
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
“Network” and then press [OK].
4 Press [ ], [ ] repeatedly to select
“Friendly Name” and then press [OK].
•
The current name of this unit is displayed. Press
[OK] to edit.
5 Press [ ], [ ], [ ], [ ] to input the
friendly name.
•
Only ASCII characters can be used.
•
“A” can be added when you press the [ ] at
the time of the last letter of the Friendly Name
is selected.
•
Press [CLEAR] to delete a letter.
•
Press [ 10] to insert a letter “A”.
•
Default name is “Technics-SL-G700-
****
”.
“
****
” stands for a number that is unique to
each set.
6 Press [OK] to apply the settings.
7 Press [RETURN] to exit the settings.
•
When Friendly Name is not displayed properly,
delete and input the friendly name again. If the
problem still persists, restore all the settings to the
factory defaults. (
⇒
87)
To check the MAC address of this
unit
“MAC Address”
1 Press [NWP].
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
“Network” and then press [OK].
4 Press [ ], [ ] repeatedly to select “MAC
Address” and then press [OK].
•
The MAC address of this unit is displayed.
5 Press [RETURN] to exit the screen.
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
