25
Connecting to an amplifier
You can output analogue audio signals from
this unit and play back music.
Connecting to an amplifier
XLR cable
*
(not supplied)
Analogue audio
cable (supplied)
Amplifier
Amplifier with
unbalanced input
terminals
Amplifier with
balanced input
terminals
*
: We recommend using cables with a length of
3 m or less.
•
For details, refer to the operating instructions of
the connected device.
•
Do not use any other analogue audio cables except
the supplied one.
•
When you connect a power amplifier, etc., set
“A.Output Level” to “Variable” for volume control
with this unit. When you connect a pre-amplifier,
etc., set “A.Output Level” to “Fixed” for volume
control with the connected device. (
⇒
72)
The factory default is “Fixed”.
Summary of Contents for SL-G700
Page 1: ...Operating Instructions Network Super Audio CD Player SL G700 ...
Page 21: ...21 Continued 04 Measure the output signal when speakers are connected and correct its output ...
Page 58: ...58 Operations during playback Stop Pause Podcasts Press again to resume Skip ...
Page 64: ...64 Note Depending on the country or region playback may not be available ...
