Technics OTTAVA S SC-C50, Owner'S Manual, Page: 8 / 40

08
Control reference guide
(08)
This unit (front/top)
01 [ ] Standby/on switch
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 Adjust volume
•
0 (min) to 100 (max)
03 Display
Input source, etc. are displayed.
04 [ ] Favorite
You can register your favorite station or
playlist (USB, Podcasts, Spotify, etc.), and call
them.
• You can register up to 9 favorite stations or
playlists. To register, press and hold [
]
until “Memorised” is displayed while
a station tuned in or music is being
played back. Then, the station or music
is automatically registered to an unused
number from 1 to 9.
05 [ ] Play/Pause
06 [ ] Switch the input source
07 Built-in microphone
08 Product identification marking (Bottom
of this unit)
•
The model number is indicated.
This unit (rear)
10BASE-T/
100BASE-TX
OPT IN L AN AUX IN
DIMMER
INFO
AC IN
500mA 5V
10BASE-T/
100BASE-TX
OPT IN L AN AUX IN
DIMMER
INFO
AC IN
500mA 5V
09 [•DIMMER/-INFO]
Adjust the brightness of illumination of the
display and bottom of the unit.
•
When the display is turned off, it will
light up for a few seconds only when you
operate this unit. Before the display turns
off, “Display Off” will be displayed for a few
seconds.
• Press [•DIMMER/-INFO] repeatedly to
switch the brightness.
•
Press and hold [•DIMMER/-INFO] to
display the network status or settings. The
displayed items are changed by pressing
[•DIMMER/-INFO] repeatedly. (The
brightness does not change during this
period.)
10 USB-A terminal (DC 5 V 500 mA)
You can play back music stored on the
connected USB device using the dedicated
app “Technics Audio Center” (free of charge)
on your tablet/smartphone (

09). For
details, visit:
www.technics.com/support/
•
If a USB device is connected, [•DIMMER/-
INFO] is difficult to press. Remove the USB
device as necessary.
11 LAN terminal (

11)
12 Optical digital input terminal
You can connect a CD player, etc. with
optical digital audio cable (not supplied) and
play back music. (

09)
13 AUX IN terminal
You can connect a portable audio player, etc.
with an analog audio cable (

3.5 mm ( 1 /
8
”))
(not supplied) and play back music. (

09)
14 AC IN terminal ( ) (

09)