Page 11
2.2
Using the Upgrade Feature
After Step 1 above a user may simply click on the Upgrade button. An alternative manual
process is described below.
2.3
Manual method (alternate method)
Step Two:
Modify the Config.xml
Navigate to the Android tab of the COM51 and click on the config option.
Add the software file name and enter the following text in the Config.xml.
For Update over QAM
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system>
<systemSoftwareUpdate>QAM='23' FileName='enter_software_file_name'</systemSoftwareUpdate>
</system>
</configuration>
Click
For Update over IP
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system>
<systemSoftwareUpdate>IP='226.100.0.203:6003'
FileName='enter_software_file_name'</systemSoftwareUpdate>
</system>
</configuration>
Click
Step Three:
Send a COMMAND.XML
While information that a software update is available for the UCW4026MCS is sent via the
CONFIG.XML, the devices do not constantly check the CONFIG.XML. In order to “refresh”
the CONFIG.XML, you can send a COMMAND.XML file.
