manualshive.com logo in svg

Technicolor TG789vac v2, Setup And User Manual, Page: 15 / 103

Share
Download
Technicolor TG789vac v2 Setup And User Manual Download Page 15

11

1 Getting started

DMS3-CTC-25-282 v1.0

1.3.6 Status LEDs

Introduction

On the top panel of your TG789vac v2, you can find a number of status LEDs, indicating the state of the device.

Info LED

The 

Info

 (

) LED provides information about the overall state of your TG789vac v2. For more information, see 

“Wireless 

On/Off button” on page 10

.

Info

Ethernet

Voice

Wireless 2.4 GHZ

Wireless 5 GHZ

Broadband

Internet

WPS

TV

Colour

State

Description

Green

Solid on

All services are available. The wireless access point is 

enabled

. The other 

status LEDs are deactivated.

Blue

Solid on

All services are available. The wireless access point is 

disabled

. The other 

status LEDs are deactivated.

Red

Solid on

Some services are not available. The TG789vac v2 automatically activates 
the other status LEDs to allow you to see which services are running.

Orange

Solid on

Bootloader selftest

Blinking

Bootloader active (during upgrade)

Off

The TG789vac v2 is powered off.

The other status LEDs are only activated when the Internet service is down.

Summary of Contents for TG789vac v2








































































































Reviews:

No comments