Technicolor TG672 Setup And User Manual Download Page 54

Page: 54 / 152

4 CONFIGURATION TOOLS

E-DOC-CTC-20100728-0008 v2.0



Information messages, indicated by a green traffic light.

Navigation bar

The Navigation bar displays your current position in the

Technicolor Gateway GUI

Some page are available in different configuration levels. These pages have additional links (for example,

Overview

Configure

) in the right part of the navigation bar that allow you to switch between the configuration levels.

Content pane

The content pane displays the information and configurable items of the selected item.

Tasks pane

To allow a quick configuration of your Technicolor Gateway, some pages may offer you a number of related tasks in the

Pick

a task

list. These tasks will guide you to the page where you can perform the selected task.

If none of these events occur, the notification is not shown.

Summary of Contents for TG672

























































































































































Search results

Summary of Contents for TG672

Reviews:

Brands by name

Popular brands

Technicolor TG672, Setup And User Manual

Search results

Summary of Contents for TG672

Reviews:

Brands by name

Popular brands