manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 47

39

3 MANUAL INSTALLATION

E-DOC-CTC-20100728-0008 v2.0

3.5.3 Managing your Mobile Connection with the 

Technicolor Gateway GUI

Introduction

You can view and manage the parameters of your mobile connection via the Technicolor Gateway GUI.

Procedure

To manage your mobile USB connection via the Technicolor Gateway GUI:

1

Browse to the Technicolor Gateway GUI.

2

On the 

Broadband Connection 

menu, click 

Internet Services

.

3

Click 

View more...

 for the mobile USB connection. The 

Overview

 page of the mobile USB connection is shown. 

4

In the location bar, click 

Configure

. The 

Configure

 page of the mobile connection appears.

5

Under 

Mobile Information

, update the following fields if necessary:

APN

:

The public APN used to access the Internet, or the private APN to access a local network.

Operator Mode

:

2G / 3G / automatic (let the Technicolor Gateway choose the best operator mode)

Pin

:

The PIN code of your SIM card.

6

Click 

Apply

 to apply your configuration changes.

The mobile connection needs to be configured first before it is shown on the Technicolor Gateway GUI.

Configuration changes via the Technicolor Gateway GUI are automatically saved.

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands