manualshive.com logo in svg

Technicolor TG672, Setup And User Manual

Share
Download
Technicolor TG672 Setup And User Manual Download Page 125

117

10 TECHNICOLOR GATEWAY NETWORK SERVICES

E-DOC-CTC-20100728-0008 v2.0

10.1.4 Installing UPnP on Windows XP

Adding UPnP

If you are running Microsoft Windows XP, it is recommended to add the UPnP component to your system.

Proceed as follows:

1

In the 

Start

 menu, click 

(Settings >) Control Panel

.

2

The 

Control Pane

l window appears.

Click 

Add or Remove Programs

.

3

The 

Add or Remove Programs

 window appears.

Click 

Add/Remove Windows Components

.

4

The 

Windows Components Wizard

 appears:

In the 

Components

 list, select 

Networking Services

 and click 

Details

5

The 

Networking Services

 window appears: 

Select 

Universal Plug and Play

 or 

UPnP User Interface

 and click 

OK

.

6

Click 

Next

 to start the installation and follow the instructions in the 

Windows Components Wizard

.

7

At the end of the procedure the wizard informs you that the installation was successful. Click 

Finish

 to quit.

Adding IGD Discovery and Control

Your Windows XP system is able to discover and control Internet Gateway Devices (IGD), like the Technicolor Gateway on 
your local network. Therefore, it is recommended to add the IGD Discovery and Control client to your system.

Proceed as follows:

1

On the Windows taskbar, click 

Start

.

Summary of Contents for TG672

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands