SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
971
snmp community modify
Modify an SNMP community string.
SYNTAX:
snmp community modify
index = <{ROCommunity}>
[securityname = <string>]
[communityname = <password>]
[context = <{""}>]
[targettag = <string>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
index
A human readable string uniquely identifying an entry in the
snmpCommunityTable.
REQUIRED
securityname
Configure a security name for this community string.
OPTIONAL
communityname
Configure SNMP community string.
OPTIONAL
context
Configure a context name.
OPTIONAL
targettag
Configure a string which is used to select a set of entries in
the snmpTargetAddrTable for source address checking.
OPTIONAL
storage
Configure the storage type.
OPTIONAL
nickdj.co.uk