ATM COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
51
atm debug traceconfig
Display/Modify AAL5 debug trace configuration.
SYNTAX:
atm debug traceconfig
[len = <number>]
[intf = <{atm_Internet}>]
[state = <{disabled|enabled}>]
where:
len
Maximum number of AAL5 payload bytes that will be
shown (0-2000, global setting).
OPTIONAL
intf
The name of the ATM interface to configure.
OPTIONAL
state
Enable/disable AAL5 debug tracing.
OPTIONAL
nickdj.co.uk