ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
473
eth switch shaper config
Configure common ingress shaper parameters.
SYNTAX:
eth switch shaper config
shaper = <number{0-1}>
[unicast = <{enabled|disabled}>]
[multicast = <{enabled|disabled}>]
[broadcast = <{enabled|disabled}>]
[control = <{enabled|disabled}>]
[unknown = <{enabled|disabled}>]
[discard = <{enabled|disabled}>]
[normalize = <{enabled|disabled}>]
[exclude_ipg = <{enabled|disabled}>]
where:
shaper
The shaper instance.
REQUIRED
unicast
Shape unicast traffic.
OPTIONAL
multicast
Shape multicast traffic.
OPTIONAL
broadcast
Shape broadcast traffic.
OPTIONAL
control
Shape MAC control traffic.
OPTIONAL
unknown
Shape traffic with unknown destination address.
OPTIONAL
discard
Discard frame at overflow (else attempt for flow control).
OPTIONAL
normalize
Use relative speed calculations.
OPTIONAL
exclude_ipg
Exclude the Inter Packet Gap in the speed calculations.
OPTIONAL
nickdj.co.uk