ATM COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
45
atm cac config
Configure ATM connection admission control.
SYNTAX:
atm cac config
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
state = <{disabled|enabled}>
where:
port
The port for which CAC is configured.
REQUIRED
state
Enable/disable CAC for an ATM port.
REQUIRED
nickdj.co.uk