manualshive.com logo in svg

Technicolor MediaAccess TG788VN, Setup And User Manual, Page: 24 / 159

Share
Download
Technicolor MediaAccess TG788VN Setup And User Manual Download Page 24

21

3 MANUAL INSTALLATION

DMS-CTC-20120510-0000 v1.0

Scenario 1: A MediaAccess Gateway with integrated filter

Proceed as follows:

1

Take the DSL cable. This is the gray cable that is included in your box.

2

Plug one end of the cable in the grey 

DSL

 port on the back of your MediaAccess Gateway.

3

Plug the other end of the cable:

In the 

DSL/Modem

 output of your 

splitter/filter

.

Directly into the telephone wall outlet if there is no 

splitter/filter

 between the network terminator and your local 

phone network.

Scenario 2: A MediaAccess Gateway without integrated filter

Proceed as follows:

1

Take the DSL cable. This is the grey cable that is included in your box.

2

Plug one end of the cable in the grey 

DSL

 port on the back of your MediaAccess Gateway.

3

Plug the other end of the cable into the 

DSL/MODEM

 output port of your filter/splitter.

DSL

DSL

Summary of Contents for MediaAccess TG788VN
































































































































































Reviews:

No comments