54
5 Sharing content
DMS3-CTC-25-154 v1.0
How to set up content sharing
Both the Samba and the DLNA server are
enabled by default
. The only thing that you need to do is to plug your memory
stick or external hard disk in (one of) the USB port(s) of your TG389ac.
Customizing the content sharing settings
To change the default settings, proceed as follows:
1
Browse to the TG389ac web interface.
For more information, see
“4.1.1 Accessing the TG389ac web interface from your local network” on page 33
.
2
Click
Content Sharing
. The
Content Sharing
page appears. Under
General status
, you can change the following
settings:
Samba name
:
Your TG389ac will share the content to the Samba devices under this name.
Samba enabled:
Allows you to enable or disable the Samba file sharing server.
DLNA enabled
:
Allows you to enable or disable the DLNA service.
DLNA name:
Your TG389ac will share the content with other DLNA devices under this name.
3
When you click
show advanced
, you will be able to configure the
Samba name
and
DLNA name
. On top of that you
can also change the:
Samba workgroup
:
Enter the same workgroup as used by your computer(s).
Samba description
:
Add a short description for the TG389ac shared content.
4
Click
Apply
.
5
All users connected to your TG389ac can now access the data stored on the storage device(s) that are connected to your
TG389ac.
