Technicolor MediaAccess TC8717T Setup And User Manual Download Page 34

Page: 34 / 84

2 SETUP

DMS-CTC-20140127-0004 v1.0

How to connect your computer on Mac OS X

Proceed as follows:

Click the

WiFi

icon on the menu bar.

A list of available wireless networks appears.

Select the Gateway from the list.

The

WiFi

window prompts you to enter your WPA password.

In the

Password

box, type the

Network Key (Password)

which is printed on the Gateway's bottom panel label and select the

Remember this network

box and click

You are now connected to the Gateway network.

The Gateway is listed with the Network Name (SSID1 and/or SSID2) which is printed on the Gateway's bottom
panel label. For more information, see

“Product label (item A)” on page 11

Summary of Contents for MediaAccess TC8717T





















































































Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands

Technicolor MediaAccess TC8717T, Setup And User Manual

Search results

Summary of Contents for MediaAccess TC8717T

Reviews:

Related manuals for MediaAccess TC8717T

Brands by name

Popular brands