100BASE-T1 MediaConverter_BCM
User Manual
13
5
100BASE-T1 filter
There are different BroadR-Reach filters in different hardware versions of the
100BASE-T1 MediaConverter_BCM: The following 100BASE-T1 filter is used in the
hardware version 3.0:
In Version 3.0 the Würth CMC 510010003 is used for L32.
In Version 3.0a the TDK CMC ACT45L - 2 01 - 2P is used for L32.
Figure 5-1: 100BASE-T1 filter for HW v3.0 and v3.0a
The following 100BASE-T1 filter is used in the hardware version 2.0:
Figure 5-2: 100BASE-T1 filter for HW v2.0
All filter versions are compatible with each other and it is possible to set up a
stable link. It is recommended to use the latest filter version.
