100BASE-T1 SPY 12 Port
User Manual
19
•
Keep original VLANs in Header:
This option adds to the 100BASET1_SPY
header the VLANs of the original packet, in the case that the BroadR-Reach
received packet is VLAN tagged. In
C
, the user can find how this
option affects to the 100BASET1_SPY header.
Note:
When the user performs any change in the configuration of any port, the
Save
Configuration
option will appear. Please select the
Restart after saving
option before
saving configuration.
When the
Save and Restart
option is enabled, and the user presses the
Save
Configuration
button, the
Restarting…
message should be shown on the website:
Figure 3-7: Prompt for restarting the device
3.4.2
Gigabit Ethernet Ports
There are four Gigabit Ethernet Ports for data logging output at the front of the device.
On the website the user can see the status by clicking on the GB-A to GB-D labels on
the left side.
