CM Eth Combo
User Manual
14
Name
Picture
Part Number
Tyco 1-PORT MATENET HDR ASSY 90DEG
9-2304372-9
Tyco MATENET, FEMALE INSERT MODUL,
BLACK
965776-1
Tyco Nano MQS crimp contact
1-1703930-2
Table 2-5: Parts of Tyco MATEnet Connector
Note
: You can use the official Tyco tool for these crimp contacts.
Pin
Function
Pin
Function
1
1000BASE-T1 3A/3B Minus
2
1000BASE-T1 3A/3B Plus
Table 2-6: Pinning of Tyco Mate Net Connector
2.1.5
Micro HDMI connector
This is an interface for programming and debugging (only for development.)
2.2
Other Interfaces
2.2.1
Rotary-Switch
The following IPs will be set as default for the CM_Eth_Combo.
You get access to the Webserver only by the configured configuration port. Out of the
box GB A Port is set as the configuration port.
Rotary switch on 0 -> IP: 10.104.3.128
Rotary switch on 1 -> IP: 10.104.3.129
...
Rotary switch on D -> IP: 10.104.3.141
Rotary switch on E -> IP: 10.104.3.142
Rotary switch on F -> IP: 10.104.3.143 / Reset