CM CAN Combo
User Manual
49
Figure 4-27: Lists to edit and show XCP entries
Table
1
: Here you can define new entries for XCP for CAN polling.
Table
2
: Here you can add new entries for the XCP for CAN and Flexray DAQ while
importing a *.json-file
4.6.1
Table 1
Figure 4-28: Example for XCP on CAN - Polling
By clicking on
you can add more entries. Please fill in the values before you click
on
. By pressing
Apply
the configuration will be overtaken. By pressing
save
configuration
the entries will be stored permanently.
BusId
: It is the BusId from the CAN-Port, the XCP is activated
CanIdReq
: CAN-Id of the request
Offset
/
Repetition
: not supported => empty
Address
: it is the starting address of memory range in the XCP slave