CM CAN Combo
User Manual
27
WakeUp Line 2 Actuator
: If this box is checked, this wakeup line provides the
same voltage as the voltage on the powerline (kind of loop through). It
provides power as long as there is a reason to stay awake.
WakeUp Line 2 Actuator
: If this box is unchecked, this wakeup line is only
input and wakes up the device when supplied.
4.4.5
WUP time to LOW
Figure 4-11: WUP time to LOW
Here you define the time in seconds, which has to go by before the actuator of the
wakeup lines is set to ground. The starting point of time counter is the same time as
there is no reason anymore to be awake of the CM_CAN_Combo itself.
Default value is 10 seconds.