CM CAN Combo
User Manual
18
3
ACCESS BY WEBSERVER
You can get access to the Webserver by connecting the device via the 1000BASE-T-
Port (RJ-45) to your PC. Here the IP address of the device is dependent on the status
of the rotary switch (see
C
Or you get access to the Webserver by the 100BASE-T1 Port to the Microcontroller and
the default IP address 192.168.0.49. The default configuration of this port is as
100BASE-T1-slave.
1.
Please go to the networkadapter settings and adjust the IP in the same range of
your
CM_CAN_Combo,
dependent on which port you are connected to.
2.
Enter the IP Address in your standard web browser. For more information about the
IP addresses see
C
C
Note:
Chrome or Firefox are recommended.
3.
The following website should appear
Figure 3-1: Home Screen CM_CAN_Combo