9
PORTHOLE KIT
ASSEMBLING
l
Make a hole in the window
pane.
l
Insert the porthole without the
plug.
l
Remove the terminal pipe
fitting of the warm air outlet
from the retractile flexible
pipe.
l
Bring the air conditioner near
the window and insert
the air outlet in the porthole.
SINGLE GLASS
DOUBLE GLASS
If you want to utilise the air conditioner in several rooms, it is
possible to buy varies portholes for air discharge separately.
CARE AND CLEANING
WARNING!
For safety’s sake, be sure to turn the air conditioner OFF
and also disconnect it from the power supply before cleaning it.
1. Cleaning of the Air Filter
The air filter must be checked at least once every two weeks
operation. Operation with a dirty filter always causes a lower
efficiency of the air conditioner and severe product damage.
The filter is located at the back of the intake grille: open horizontally
the cover (1), grasp the air filter handle (2) and pull upwards.
Repeat the same operation also on the opposite side of the air con-
ditioner. Use a vacuum cleaner to remove light dust. If there is
sticky dust on the filter, wash it with lukewarm soapy water, then
rinse in clean, cold water and dry it before reinstallation.
2. Cleaning of Casing and Grilles.
To clean the air conditioner, wipe it with a clean soft cloth, lightly
moisted. In case it is stained, moisten the cloth with soapy water.
Never use solvents or harsh chemicals, nor very hot water. Do not
pour water over the air conditioner to clean it: this will damage the
internal components and cause an electric shock hazard.
3. Storage.
If you are not going to make use of the air conditioner for a long
period, before storing it away clean the air filters and verify that both
the internal water tanks are empty. Always store the unit
in the vertical position. Do not put heavy objects on top of the unit
and protect it with a cloth or a plastic bag.
4. Transport.
Keep the air conditioner in the vertical position during
transportation.
5. For your safety care check periodically the conditions of the
electric supply cable; the electrical connection of the unit is X
type with cable prepared in a special way; in case you should
notice any damage due to usage, call the nearest After Sale
Service to get the cable replaced.
2
1
NO!
EG
HOLE
NOTE
HOLE
HOLE
NOTE
NOTE
Eliminate one or two membranes, cut-
ting them with the scissors according
to the thickness of the glass.
USO_374252032_MTF97.qxd 17-01-2007 11:50 Pagina 10
