5
EG
REMOTE CONTROL UNIT
DISPLAY
Information is displayed when the remote controller is switched
on. If switched off, only the operating mode, the room temperature
and the clock are shown
Operation mode
Fan speed
High speed
Automatic
Medium speed
Low speed
Displayed when
transmitting data
Set point
temperature
I FEEL mode is active
(remote controller
sensor active)
Timer modes
Automatic
Cooling
Heating
Dehumidification
Fan
C
Clock
Room
temperature
Night
mode
Oscillation
Flap
Filter Ti0
2
is ON
HIGH POWER
mode
TRANSMITTER
When you press
the buttons of the
remote control unit,
the mark
a p p e a r s o n t h e
display to transmit
the setting changes
to the receiver in the
air conditioner.
hOURS AND MINUTES SETTING
BUTTONS
With these buttons is possible to set the
clock and the timer. For details refer to
paragraphs “ SETTING THE HOUR” and
“SETTING THE TIMER”.
TIMER SELECTION BUTTON
Press this button to select the type of
timer to activate. For details refer to
paragraph “SETTING THE TIMER”.
C
TEMPERATURE SETTING BUTTONS
- (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
SENSOR
A t e m p e r a t u r e
sensor inside the
remote control unit
detects the room
temperature.
CLOK AND TIMER SETTING BUTTON
Press this button in order to:
• set the clock
• set the ON/OFF timer
For details refer to paragraphs “SETTING
THE HOUR” and “SETTING THE TIMER”.
IFEEL/IFEEL C SENSOR SELECTOR
Press this button to modify the active
setting for room temperature detection
(from remote controller to air conditioner
and viceversa).
“FAN “ BUTTON (fan speed)
Fan speed is automatically
s e l e c t e d b y t h e
microcomputer.
High speed.
Medium speed.
Low speed.
ON/OFF BUTTON
This button turns the air conditioner ON
and OFF.
FLAP BUTTON
Press this button in order to select the
desired function.
Fixed: six position
Continous oscillations
Automatically oscillations
NIGhT/ECO BUTTON
Press this button in order to select the
NIGHT/ECO mode.
“hIGh POwER” BUTTON
Press this button in order to select the
HIGH POWER mode.
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(cooling)
The air conditioner makes the room
cooler.
(dry)
The air conditioner reduces the humidity
in the room.
(automatic)
When this setting is selected (+ IFEEL
ON), the unit calculates the difference
between the thermostat setting and
the perceived room temperature and
automatically switches to the “cool” or
“heat” mode.
(fan)
The air conditioner works only as a
circulation fan.
Inverter model
MENU BUTTON
Use this button in order to enter the
functions menu.
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(heating)
The air conditioner makes the room
warmer.
Fixed symbol
: the fan stops when the set
temperature is exceeded.
B l i n k i n g s y m b o l ( h E A T I N G
RECIRCULATION FUNCTION)
: the
fan keeps running even after the set
temperature is exceeded.
(automatic)
When this setting is selected (+ IFEEL ON),
the unit calculates the difference between
the thermostat setting and the perceived
room temperature and automatically
switches to the “cool” or “heat” mode.