24
REMOTE CONTROL FUNCTIONS
+
-
LIGHT
BLOW
TURBO
REMOTE CONTROL
+
BUTTON
- BUTTON
LIGHT BUTTON
Press this button to increase the temper ature
set.
Pressing this button will increase the
temperature by 1°C from a minimum of 16°C
to a maximum of 30°C
It is not possible to set the temper
ature in
AUTO function mode..
Press this button to decrease the temper ature
set.
Pressing this button will decrease the
temperature by 1°C from a minimum of 16°C
to a maximum of 30°C
It is not possible to set the temper
ature in
AUTO function mode
Press this button to acti vate or deactivate the
display on the panel of the indoor unit.
The BLO W progr am allo ws the remo val
of an y condensation on the indoor unit’
s
heat exc hanger w hen pressing OFF in the
Cooling and Dehumidi
cation function
modes. Activating this progr am, the icon
is displayed on the remote control. At switch
of the unit is on stand-b y and the v entilation
functions at a minimum speed with the
horizontal discharge grills open for a further
10 minutes. To interrupt the BLO W program,
press the BLOW button again: ventilation will
stop and the discharge grills will close.
Press this button to activate or deactivate Turbo
ventilation. This speed is available in Cooling
and Heating function modes. After setting
the Turbo v entilation, the follo wing icon
will be displa yed on the remote control. The
Turbo fan speed can be deacti vated even by
changing the function mode or the ventilation
speed by means of the FAN button.
BLOW or X-FAN BUTTON
TURBO BUTTON