29
(3) Remove the 6 screws of the front panel and pull it
toward you. (Fig. 9)
(4) Remove the 2 screws used to mount the
evaporator. (Fig. 10)
(5) Remove the rubber cap to pull the thermistor out of
the evaporator. (Fig. 10)
(6) Cut the plastic clamp securing the drain hose to the
front fan casing. (Fig. 10)
(7) The evaporator is built into the drain pan. Pull out
the drain pan together with the evaporator in the
direction of the arrow. (Fig. 10)
The foamed polystyrene drain pan is fragile: DO
NOT apply excessive force when removing it.
(8) The evaporator can be removed by sliding it out
from the drain pan in the direction of the arrow.
(Fig. 11)
Front panel
Screw
Plastic clamp
Drain pan
Screw
Rubber cap
Thermistor
Drain hose
Front
fan casing
Drain pan
Evaporator
(Indoor coil)
Mounting
plate
Mounting
plate
Fig.9
Fig.10
Fig.11
IMPORTANT
