PARTS LIST
ATTENTION: Before you begin the assembly,
make sure that all parts are included in good
condition.
ASSEMBLY INSTRUCTIONS FOR TECHNI SPORT CHAIR MODEL
RTA-TS70
ATTENTION:
⚠
Follow the instructions step by step.
⚠
To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
⚠
Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
⚠
Using the wrong size of screws on a part could result in damage to the screw or the part.
Backrest, x1
Seat, x1
Hydraulic
Gas Lift, x1
Covers for
Gas Lift, x1 set
Star Base, x1
Caster, x5
Hole Covers, x4
M6x8mm, x4
Insert the casters (H) into the legs of
the base (G) using pressure.
REMOVE AND DISCARD THE PLASTIC
CAP FROM THE TOP OF THE GAS LIFT
(E),
and place the gas lift in the middle of the
base and cover it with (F) as shown.
Place the seat (B) upside-down with
its back end towards you as shown.
Using screws (L), assemble the mechanism
(D) to the seat with its handle facing to your
LEFT.
With the seat positioned as shown,
assemble the armrests (C) to the
seat frame on their respective sides using
screws (L) as shown.
M8x20mm, x16
Tighten the screws well before you sit on the
chair for the first time.
First attach the lumbar pillow (Q),
then the neck pillow (P) by
fastening the buckles behind the
backrest as shown.
A
B
C
Armrests
(Sitting on the chair,
Not looking at it)
E
F
G
H
P
N
M
I
L
K
Left
Using screws (M), attach to the
brackets on their respective sides,
first the covers (J), then the covers (K), and
finally cover the holes with (I) as shown.
D
Mechanism,
x1
Right
Lumbar Pillow,
x1
O
Neck Pillow, x1
Allen Wrench, x1
J
Seat Covers
(Sitting on the chair,
Not looking at it)
Right Left
Bracket Covers
(Sitting on the chair,
Not looking at it)
Right Left
E
F
H
G
REMOVE
CAP!
B
D
L x4
(Back end of seat)
C
(LEFT)
(Back end of seat)
C
(RIGHT)
L x8
A
Place the seat over the base making
sure the tip of the gas lift enters into
the hole of the mechanism. Then assemble
the backrest (A) to the seat brackets on both
sides using screws (L) as shown.
L x4
FIRST!
(M) (J)
K
M
I
P
Q
